Burners
Heating
TBML 310 LX MC 50Hz
Code 56880010Progressive/modulating two-stage dual fuel burners with low polluting emissions with mechanical cam
- Two-stage progressive.
- Electronic cam.
- Low NOx emissions.
- Home
- Products
- Burners
- Dual Fuel Gas Light Oil
- TBML 310 LX MC 50Hz
Technical data
Fuel
Natural Gas
Operation
Mechanical Modulation
Minimum Thermal Power (kW) to ErP
500
Maximum Thermal Power (kW) to ErP
3200
Min flow rate (Sm³/H)
53
Max flow rate (Sm³/H)
339
Second Fuel
Light oil
Second Fuel Operation
Two-stage
Second Fuel Min Thermal Power (kW)
950
Second Fuel Max Thermal Power (kW)
3200
Min flow rate (kg/h)
80
Max flow rate (kg/h)
270
Max Viscosity (°E)
1.5
Electric power supply type
AC
No. of Phases
3N
Power Supply Voltage (V)
400
Power Supply Frequency (Hz)
50
Fan Motor Power (kW)
7.5
Weight with packaging (kg)
160
Width (mm)
1070
Depth (mm)
1070
Height (mm)
810
Technical Descriptions
Burner with alternate methane gas/diesel fuel supply, EC approved according to European Directives EN676 and EN267. Gas side progressive two-stage operation, diesel side two-stage
Continuous modulation operation by installing P.I.D. controller in the control panel (to be ordered separately with modulation probe)
Modulation ratio 1:6
Gas burner with low NOx and CO emissions in accordance with European standard EN676: class 3
Burner with Low NOx and CO emissions on light oil according to European standard EN267: 2
Combustion air intake with throttle damper. Mechanical cam air flow adjustment
Combustion head adjustment
Fully closing air damper on shutdown to avoid loss of heat through the chimney.
Maintenance facilitated by the possibility of removing the combustion head without having to remove the burner from the boiler.
Sliding boiler coupling flange to adapt the blast-pipe to the various types of boilers
Easy maintenance thanks to the two-sides hinge which allows the removal of the combustion head without having to remove the burner from the boiler.
Device made of sound-absorbing material to reduce fan noise
CE version gas train is complete with butterfly valve, operation and safety valve with electromagnetic drive, valve tightness control, minimum pressure switch, pressure regulator and gas filter
Fail proof connectors for burner/gas train connection
Gas train exit: up
Pump connected to fan motor through electromagnetic clutch
Fuel supply circuit made of gear pump with pressure adjustment, shut-off valves and safety valve
Manual fuel switching
Flame detection by means of infrared IRD photocell
Control panel equipped either with display showing the working process and with the keyboard for the burner adjustment.
Electrical system with protection rating IP40
Operating range
This product is part of the range TBML LX MC
Discover the entire seriesLogin
- © 2024 Baltur S.p.A.
- C.F. e P.IVA 00040200388
Websolute